Hydraulic Bench
Features of Hydraulic Bench:
- The hydraulic bench is made of fiberglass reinforced polyester and mounted on wheels for mobility
Technical Specifications:
- Centrifugal pump: 0.37kw, 30-80 liter/min at 20.1 – 12.8m, 220 ~ 240V, 50~60Hz
- Runner: Stainless steel
- Sump tank capacity: 165 ~ 300 liters
- Small channe: 8 liter
- Flow measurement: Volumetric tank, Gauged from 0-7 liter for low flow values and from 0-40 liter for high values
- Control valve: For regulating the flow
- Open channel: To place the test module
- Measuring cylinder: Provided for the measurement of small flow rates
- Remote hand: Operating dump valve in the base of the volumetric tank
- Modules fixing: Easily interchangeable
Basic Hydraulic Feed System Module :
- Centrifugal pump: 0.37kw, 30-80 liter/min at 20.1 – 12.8m, 220 ~ 240V, 50~60Hz
- Impeller: Stainless steel
- Tank capacity: 140 liters approx.
- Flow meter: Yes
- Valve: Membrane type flow adjusting valve
- Safety switch: ON/OFF
- Support system: For accommodating the test module
- Mobility: Incorporates wheel for mobility
Bernoulli’s Theorem Demonstration Module :
- Manometer range: 0 – 300 mm of water
- Number of manometer tubes: 8
- Upstream diameter of the throat: 25 mm
- Narrowing: Downstream 21º, Upstream 10º
- Coupling system: Easy, quick and built in
- Frame structure: Anodized aluminum structure and panel of painted steel
Flow Meter Demonstration Module :
- Manometer range: 0 – 500 mm of water column
- Number of manometer tubes: 8
- Orifice plate diameter: 25 mm
- Flow meter: 2 – 30 liter / min
- Venturi dimensions: Throat diameter 20mm, Upstream pipe diameter 32mm, Downstream taper 21º,
- Upstream diameter 14º
- Orifice plate dimensions: Upstream pipe diameter 35 mm, Downstream orifice diameter 19 mm
- Coupling system: Easy, quick and built in
- Frame structure: Anodized aluminum structure and panel of painted steel
Fluid Friction Pipes Unit Module :
- Number of pipes of different diameter, material & roughness: 5
- Rough pipe (PVC): External diameter: 25 mm, Internal diameter: 17 mm
- Rough pipe (PVC): External diameter: 32 mm, Internal diameter: 23 mm
- Smooth pipe (PMMA): External diameter: 10 mm, Internal diameter: 6.5 mm
- Smooth pipe (PVC): External diameter: 20 mm, Internal diameter : 16.5 mm
- Smooth pipe (PVC): External diameter: 32 mm, Internal diameter: 26.5 mm
Type Of Valves :
- Angle seat valve : Internal diameter 20 mm
- Gate valve: Internal diameter 20 mm
- Diaphragm valve: Internal diameter 20 mm
- Ball valve: Internal diameter 20 mm
Types Coupling :
- In-line strainer : Internal diameter 20 mm
- Sudden widening : Section changes from 25 to 40 mm
- Sudden contraction : Section changes from 40 to 25 mm
- 90º elbow : Internal diameter 20 mm
- T junction : Inner diameter 20 mm
- 45º elbow : Inner diameter 20 mm
- 45º T junction : Inner diameter 20 mm
- Symmetrical Y branch : Inner diameter of each pipe 20 mm
- Double 90º elbow : Inner diameter 20 mm
Special Couplings ( Methacrylate ) :
- Pitot tube : Length : 30mm, External diameter : 4 mm and Internal diameter : 2.5 mm
- Venturi tube : Length : 180 mm, Larger section : 32 mm and Smaller section : 20 mm
- Diaphragm with measuring plate : Larger diameter 25 mm and Smaller diameter 20 mm
- Quick action connections : 34 pressure tapings
- Two water manometers : Range : 0 – 1000 mm
- Two bourdon manometers : Range : 0 – 2.5 bar
- One flow meter : Range : 600 – 6000 liter / hour
