Illuminance, Temperature And Electrical Load Are The Key Variables Affecting Photovoltaic Solar Cells. It Allows You To Conduct Targeted Experiments In Order To Understand The Basic Principles And Practically Relevant Effects On Cells And Modules.
Four Solar Cells Are Illuminated By A Lamp Field With Adjustable Illuminance. They Can Be Precisely Maintained At A Selectable Set Temperature Thanks To A Regulated Peltier Module. Using The Set Of Cables Provided, The Cells Can Be Interconnected In A Number Of Ways, Via A Patch Panel. For Example, Individual Cells Can Be Bridged By Bypass Diodes In Order To Examine Differences In Power Loss Such As Caused By Shaded Cells.
A Rheostat Is Integrated Into The Patch Panel To Manually Record Current-Voltage Curves. Current And Voltage Measurements Are Detected Via The Built-In Measuring Unit. Automated Measurements Can Be Taken By Software By Specifying Electrical Load Patterns.
Learning Objectives And Experiments
- Physical Behaviour Of Solar Cells Under Varying Illuminance And Temperature
- Recording Of Current-Voltage Curves
- Calculating Current Strength And Achievable Output Based On The Single Diode Model
- How Illuminance And Temperature Affect The Curves
- Interconnecting Solar Cells In Parallel And Series Connection
- Effect Of Bypass Diodes
- Power Degradation Due To Shading
Features
- Four Solar Cells And Bypass Diodes That Can Be Freely Interconnected
- Regulated Peltier Module For Controlling The Solar Cell Temperature
- Adjustable Illuminance
- Software With Tutorials And Data On Load Profiles For Recording Characteristic Curves
Specification
- Trainer For Solar Cell Measurements
- Four Monocrystalline Silicon Solar Cells
- Lighting Unit With Adjustable Illuminance
- Backing For Solar Cells With Peltier Module For Regulating Temperature
- Patch Panel With Bypass Diodes And Adjustable Load Resistance For Selectable Types Of Connection With Individual Cells
- Function For Automated Measuring Of Characteristic Curves
- Reference Cell As Illuminance Sensor
Technical Specification
- Cell Type: Monocrystalline
- Cell Size: 125x125mm
- Typical Characteristics Of A Cell:
- Fill Factor: 76%
- Max. Output: 2,45W
- Current At Max. Output: Approx. 4,8A
- Voltage At Max. Output: Approx. 0,5V
- Short-Circuit Current: Approx. 5,4A
- Open-Circuit Voltage: Approx. 0,6V
- Peltier Module: 20°C…60°C
- Lighting Unit: 4x 100W
- 230V, 50Hz, 1 Phase
- 230V, 60Hz, 1 Phase
