If you are a college or university looking to setup a complete lab. Please contact us with your details for custom quotation. sales@aticoexport.com

Installation Technology Losses In Pipe Bends

We are the leading manufacturer and supplier of Installation Technology Losses In Pipe Bends. Now accepting bulk orders for government tenders in every major country around the globe.

In Addition To Pressure Losses Due To Pipe Friction, Pipes Through Which Water Flows Experience Pressure Losses At Changes In Pipe Direction. In Practice, Various Changes In Pipe Direction With Different Geometries Are Used In Pipe Networks. It Can Be Used To Investigate How Different Changes In Pipe Direction Made From Different Materials Affect The Pipe Flow. The Pipe Elements Used Are Commercially Standard Components In Heating And Sanitary Engineering. The Clear Panel Is Mounted On A Sturdy, Movable Frame. The Trainer Consists Of Four Pipe Elements With Ten Deflections Each With The Same Pipe Length. Two Measuring Sections Have Different Radii And Are Made Of Different Materials. A Hose Connects The Desired Measuring Section. The Flow Is Adjusted Using Valves In The Inflow And Return And Read On A Rotameter.

Learning Objectives And Experiments

  • Flow Measurement
  • Differential Pressure Measurement
  • Effect Of Flow And Surface Roughness
  • Effect Of The Flow Velocity
  • Effect Of Changes In Pipe Direction

Specification

  • Investigation Of The Pressure Loss At Pipe Elements With Different Changes In Pipe Direction And Materials
  • Pipe Elements Are Commercially Standard Components In Heating And Sanitary Engineering
  • Clear Panel Mounted On A Sturdy, Movable Frame
  • Simply Selection Of The Measuring Sections Via Hose Connection With Quick-Release Couplings
  • Flow Can Be Adjusted Via Valves
  • Flow Measurement Using Rotameter
  • Differential Pressure Measurement Via Differential Pressure Meter With Display

Technical Specification

  • Measuring Sections, Length: 2300mm
  • Pipe Section 1: Steel, Diameter: 1/2”, 90° Pipe Angle
  • Pipe Section 2: Steel, Diameter: 1/2”, 90° Pipe Bend
  • Pipe Section 3: Copper, Diameter: 18x1mm, 90° Pipe Angle
  • Pipe Section 4: Copper, Diameter: 18x1mm, 90° Pipe Bend

Measuring Ranges

  • Flow Rate: 150…1600L/H
  • Differential Pressure: ±350mbar

 

Tell us Your Requirements

Sending your message...



Your Cart

Your Cart is Empty! Go Shopping